Notebook keyboards 2016
A few days ago i replaced my acer notebooks keyboard, several of its keys had become unreliable months ago I first attempted to clean it but that just broke some little plastic part off with no improvement. The process was a bit boing, 24 pages of the (well written) service manual 36 screws some epoxy and 2 hours later my note book was working again with new keyboard.
This notebook is definitely not built to be serviced, having to disassemble it partly from the bottom to get to the top. Some screws screw into plastic, many of them have the plastic cracked after screw removial making reassembly tricky. Some screws screwed into metal inserts, 2 of which broke off without me even touching them, requiring the epoxy to reattach the metal inserts onto the brittle plastic. There are also plastic latches before you disassemble things, the ones of the main door at the bottom are indestructable it seems but the ones deeper inside seem not intended to be reused judging from the smaller number of clicking sounds when reassembling …
My previous acer notebook i once dropped and it still works. It also still has its original keyboard and the hp omnibook i had before i could use until many of the keys on its keyboard had no readable symbols on them anymore. Though today that old hp notebooks plastic parts have also become extreemly brittle but its keyboard could be exchanged by just removing one or 2 screws IIRC.
In the distant past electronics seemed to last forever becoming obsolete long before failing. Now it seems most stuff fails long before becoming obsolete.
Both keyboards after the replacement:
And most disappointingly no parts where left unused after reassembly nor where any missing. I guess my workspace was too tidy.