Lair Of The Multimedia Guru

2015-01-12

Seagate barracuda

2 Days ago shortly after i woke up, i heared a squeek, klick, squeek, … noise from my computers. A quick run of smartctl didnt reveal anything majorly wrong, and the noise stopped for a moment. when it started again, i systematically tried putting disks in sleep mode with hdparm to identify which if any hdd was making these noises. But no hdparm command affected the noise, then slowly waking up, i realized that i actually had more disks in the box than i got results from smartctl, also a look in syslog confirmed that ata2 was not healthy, teh first failed command was at 12:25:54, ata2.00: failed command: IDENTIFY DEVICE, a minute later ata2: reset failed, giving up. Restarting the box and reconnecting the cables did not help either.
My last smartctl output of it from 2 month ago listed it at 20687 Power_On_Hours and 2504 Reallocated_Sector_Ct, none of the values was above their thresholds.
This disk was used for half my fate clients before i moved them to a more powerfull box and it itself was a replacement for a failing 1tb samsung disk, well ironically the samsung disk that the 1tb seagate disk should replace still works though with 3458 pendng sectors.
Iam not sure if iam imagining it but it seems like the quality of disks is getting worse each year
Though luckily this one had nothing important on it, or at least nothing i remember ;)

Filed under: Uncategorized — Michael @ 21:39

Powered by WordPress